soldering copper tube

induction soldering copper tubing to brass valves

High frequency induction soldering copper tubing to brass valves Objective: Test: Induction SolderingĀ copper tubing to brass valves Industry:Ā HVAC Materials:Ā Copper and brass pipes Equipment: DW-HF-25kw induction heating machine Power:Ā 16 kW Temperature:Ā 932oF (500oC) Time:Ā 20 seconds Coil: Coated custom-made coil. The Process: This application request was brought to HLQ Induction Heating Powerā€™s attention by a HVAC company. Their … Read more

Induction Soldering Copper Tube

Induction Soldering Copper Tube With High Frequency Heating Units

Objective: To heat a section of 3/8″ copper tubing along with a 900 elbow for soldering.Ā The copper tubing is to be used in Ice Machine Evaporator Assemblies, andĀ soldering takes place after the tubes have been placed within the assembly.Ā Heating must take place in a channel type coil to provide easy access, onceĀ the tubing has been installed. Solder can be manually fed after temperature
has been reached.
Material: 3/8″ Thin Walled Copper Tubing and 900 Elbow
Temperature: 6000F
Application: Through the use of the DW-UHF-20kWĀ output solid state inductionĀ power supply and a unique three (3) turn channel coil, the following resultsĀ were achieved:
6000F was reached in 10 seconds.
A quality solder joint was observed with adequate flow and surfaceĀ texture.
Equipment: DW-UHF-20kW output solid state induction power supply includingĀ one (1) remote heat station containing one (1) 1.2 Ī¼F capacitor, and a uniqueĀ three (3) turn channel coil.
Frequency: 200 kHz

induction soldering copper tube

=