I-Induction Brazing Shaft

inkcazelo

I-Induction Brazing Shaft kunye neCarbide kunye neHighter Frequency Outuction Brazing Heater

Izinto:Cone emise i-carbide 1.12 ″ (28.4mm) dia, 1.5 ″ (38.1mm) ubude, ishafti yentsimbi engatyiwa 1.12 ″ (28.4mm) dia kunye nobude obahlukeneyo, ukubhobhoza okumnyama kunye nebraze shims

Ukushisa: 1500 ºF (815 ºC)
Ukuphindaphinda: 300 kHz
Izixhobo: I-DW-UHF-10 kW inkqubo yokufudumala yokutshisa, ixhotywe kwiphepha elisebenza kude elinama-capacitor a-1.0μF apheleleyo kwi-0.5μF

• I-coil yokukhenkcesha yokucoca iyenzelwe kwaye iphuhliswe ngokukodwa kule sicelo.

inkqubo:

I-coil ye-helical ye-3 isetyenziselwa ukukhangela i-carbide kwi-shaft. I-shaft yensimbi ihlanjululwa kwaye i-braze shim ifakwe phezulu. I-carbide tip ishixiwe kwaye ifakwe phezulu kwe-shim, idibanise imbobo ye-countersunk kwi-carbide. Umgodi awuketshetshiyo ngenxa yokuba ukuphuma kwamanzi kwaye kubangela i-carbide yokwakha uxinzelelo kwaye uzame ukuhlaziya kwi-shaft. Amandla asetyenziselwa imizuzwana ye-85 ukuze i-braze shim iqhume kwaye idibanise kakuhle.

Iziphumo / IiNzuzo Ukufudumala ukutshisa okubonelelayo:
• Ukufudumeza ngokukhawuleza kwendawo kuphela apho kuyimfuneko
• Yakha amacandelo ahlambulukileyo, alawulwayo
• Ukufudumala kweentambo ezingenanto ezingabandakanyi isakhono soomsebenzi wokuvelisa
• Nokwabiwa kobushushu

Ukuqulunqwa kwesibhakabhaka se-carbide kwi-shaft

 

 

 

 

 

 

 

 

i-shaft-shaft-shaft