Ukunxibelelana kwe-Annealing Brass

inkcazelo

Ukukhupha i-Annealing Brass Qha ga mshelwano nge-Crimping ne-RF yoHulelo lweNkqubo

Injongo Ukongeza indawo encinci yokuqhagamshelana nombane ngokukhwabanisa
Isixhobo seBrass somfazi esidibanisa umbane kunye neluphu enye enqamlezileyo ekupheleni kwe-0.5 ”(12.7mm) ubude, 0.25” (6.3mm) ububanzi kunye no-0.03 ”(0.8mm) ubukhulu, 1000ºF (538ºC)
Ukushisa 1000ºF (538ºC)
Ukuphindaphinda 310 kHz
Izixhobo • Inkqubo ye-DW-UHF-10kW yokufudumeza, ifakwe kwintloko yokusebenza ekude equlathe ii-capacitor ezimbini ze-1.0μF iyonke eyi-0.5 μF

uqhagamshelo lwe-induction elenzelwe ukunxibelelana
• Ikhoyili yokufudumeza induction yenzelwe kwaye yaphuhliswa ngokukodwa kwesi sicelo.
Inkqubo A enye i-hairpin coil isetyenziselwa ukufudumeza unxibelelwano lombane kwi-1000ºF (538ºC) kwimizuzwana eyi-1.5. Abafowunelwa bakwimicu kwi-0.75 ”(19mm) kwaye baya kuqhuba ngokuqhubekayo kwinqanaba le-50 '(15.24m) ngomzuzu.
Iziphumo / IiNzuzo Ukukhutshwa kwefuthe kunika:
• Ukufudumeza okungenasandla okungabandakanyi buchule bokuqhuba imveliso
• Ukuchazela ukuchaneka
• Iziphumo ezihambelanayo

Ukudibana-ubhedu-ukunxibelelana