Ukutyalwa kwebhanti yentsimbi kwi-tube yethusi

Ukuphakanyiswa okuPhakamileyo kweThubhu yensimbi yeBronze kwiTyhubhu yeCopper

injongo
Injongo kukubamba ityhubhu yentsimbi kumbhobho wobhedu kwimizuzwana engama-60 usebenzisa i-alloy kunye ne-brazing alloy.

izixhobo

I-DW-UHF-10kw induction brazing heater

Zintathu ijika coil ezimbini

izinto
• Ityhubhu yentsimbi kunye nesamkeli sobhedu
Ingxubevange yeBraze (CDA 681)
• I-B-1 flux

Iiparameters eziphambili
Ubushushu: Malunga ne-1750 ° F (954 ° C)
Rhoqo: I-148 kHz

inkqubo:
  1. Icandelo lendibano lalidityaniswe kwangaphambili laza laxutywa (B-1) emva koko labekwa kwi-coil ezimbini zedayimani enesangqa esinye esenziwe kwangaphambili se-alloy ring ebekwe kwindawo yomdibaniso.
  2. Ukuhamba kweAlloy kunye nokudibana kugqityiwe kwimizuzwana engama-60.
  3. Izinto zazipholile emanzini emva kokugqitywa kwe ukukhangela ibhondi.
  4. Ukudityaniswa emva koko kwahlulwa-hlulwa ukuze kuqinisekiswe ukuba inkqubo yokutshisa ivelise idreyini eqinileyo, ekumgangatho ophezulu.

Iziphumo / IiNzuzo:

  • Amalungu aqinileyo omelele nge lokutshisa
  • Ukukhethwa kunye nokuchaneka kwendawo yokushisa, okubangelwa ukuphazamiseka okuyingcipheko kunye nokuxinzelelana ngokubambisana kune-welding
  • Ngaphantsi kwe-oxidation
  • Imijikelezo yokutshisa ngokukhawuleza
  • Iziphumo ezingaphezulu ezifanelekileyo kunye nokufaneleka kwemveliso enkulu yemveliso, ngaphandle kwemfuneko yokucutshungulwa kweetch
  • Ekhuselekileyo kunokuba i-flame brazing

induction brazing steel tube kwinkqubo yobhedu ityhubhu