Ultrahigh Frequency Brazing System

Quenching of shaft,Quenching of gear,Brazing of copper bars,Heating of bullet shell,Floating melt with water cooled crucibleAnnealing of wire continuously,Etc.

SKU: 100 sets Category:

Ultrahigh Frequency Brazing System With Induction

Main characteristics:

1.With high frequency up to 150KHZ , and very thin and tiny parts can be easily heated.

2.IGBT and current inverting technologies have been used; higher reliability and lower maintenace cost.

3.100% duty cycle, continuous working is allowed at maximum power output.

4.Constant current or constant power status can be selected accordingly to achieve higher heating efficiency;

5.Display of heating power and heating current and oscillating frequency.

6.Simple to install , installation can be done by unprofessional person very easily;

7.Light weight, small size;

8.different shape and size of induction coil can be changed easily to heat different parts.

9.Advantages of the model with timer: the power and the operating time of the heating period and the retain period can be preset respectively, to realize a simple heating curve, this model is suggested to use for batch production to improve the repeatability.

10.Auto heating time: 0.1-99.9seconds,Auto retaining time: 0.1-99.9seconds,Auto cooling time: 0.1-99.9seconds

Main applications:

Quenching of shaft

Quenching of gear

Brazing of copper bars

Heating of bullet shell

Floating melt with water cooled crucible

Annealing of wire continuously,Etc.

 

Model

DW-UHF-100KW

Input Voltage

3 phases,380V±10%,50/60Hz

Output Power

100KW

Oscillate frequency

50-150KHz

Max Input Current

145A

Cooling Water

>0.2 MPa, 10L/Min,

Weight

160KG

Duty Cycle

100%

Size

Main

760x400x880mm

Head

510x300x450mm