Brazing Carbide ho Karolo ea Steel le Ho Heating Induction

Brazing Carbide ho Karolo ea Tšepe le Morero oa ho Heating oa Sepheo Sepheo sa Brazing carbide ho karolo ea tšepe Lisebelisoa tsa DW-UHF-6kw Induction Power Phepelo ea li-coil Key Power Parameters Power: 1.88 kW Mocheso: Hoo e ka bang 1500 ° F (815 ° C) Nako: metsotsoana e 14 Lisebelisoa tsa Coil- 2 helical turn (20 mm ID) 1 planar turn (40 mm OD, 13 mm Height) Carbide- 13… Bala haholoanyane

Ho qhekella Brazing Carbide to Steel

Sepheo Sephahla se phahameng sa ho kenya khauta ea tšepe ho tšepe. Lisebelisoa tse khothalelitsoeng Sesebelisoa se khothalletsoang bakeng sa ts'ebeliso ena ke mochini oa ho khabisa oa DW-HF-45KW le seteishene sa ho futhumatsa se hole. Lisebelisoa: Hlooho e kholo ea tšepe ea matla a khoheli e nang le carbides. Hlooho ke approx. 8 "OD x 4" (203.2mm OD x 101.6mm) e tenya, theko e 11 ”(279.4mm) bolelele x 2” (50.8mm) ho… Bala haholoanyane

Induction Brazing Carbide Ho Steel

Sepheo sa Induction Brazing carbide ho likarolo tsa tšepe Lisebelisoa tsa DW-HF-15kw Induction Heating Power Supply HLQ tloaelo ea li-coil Key Power Parameters Power: 5.88 kW Mocheso: Hoo e ka bang 1500 ° F (815 ° C) Nako: 10 sec Materials Coil- 2 helical turn (20 mm ID) 1 planar turn (40 mm OD, 13 mm Height) Carbide- 13 mm OD, 3 mm wall botenya Tšepe sengoathoana- 20… Bala haholoanyane

Induction Brazing Carbide Onto Steel Karolo

Induction Brazing Carbide Onto Steel Karolo Sepheo Brazing carbide holim'a tšepe workpiece Equipment DW-UHF-6KW-III Handheld Induction Brazing Heater Key Parameters Power: 4kW Mocheso: Hoo e ka bang 1500 ° F (815 ° C) Nako: 16 sec Materials Coil- 2 helical (20 mm ID) 1 planar turn (40 mm OD, 13 mm Height) Carbide- 13 mm OD, 3 mm wall botenya Tšepe sekoto–… Bala haholoanyane

Brazing Carbide To Shank Steel

Brazing Carbide To Shank Steel ka ho khahla

Sepheo: meno a carbide a brazing ho moqha oa tšepe ka nako e ka tlase ho metsotso ea 5
Lintho tse bonahalang: Mohlahare oa phala ea tšepe, 0.5 ”(12.7mm) dia, 1.25” (31.75mm) bolelele, 0.25 ”(6.35mm) meno a teteaneng a carbide, ts'ebetsong e ntšo le tšepe ea koporo ea silevera
Mocheso: 1292ºF (700ºC)
Kakaretso: 300kHz
Lisebelisoa • DW-UHF-10kW e futhumatsang tsamaiso ea ho futhumatsa, e nang le hlooho ea mosebetsi e hole e nang le 0.66μF capacitor
• Kela ea ho futhumatsa e kentsoeng le ho ntšetsoa pele ka kotloloho bakeng sa ts'ebeliso ena.
Ts'ebetso: Ho sebelisoa li-coil tse peli tse likhutlo li 'ne tsa ho futhumatsa carbide le tšepe ho 1292ºF (700ºC) metsotso e 4 ho isa ho e 5. Marikhoe a mararo a braze a laola palo ea braze mme le mocheso o lumella
ho phalla ha botle ho hlahisa maqhama a khahlehang.
Liphello / Molemo oa ho futhumala ha Melemo o fana ka:
• Ho futhumatsa ntle le matsoho ho sa kenyelletseng tsebo ea ho e etsa
• Li-Brazes tse lumellanang, tse tsitsitseng
• Esita le ho tsamaisoa ha futhumatsang

Brazing Carbide-Steel Tool e nang le Induction

Brazing Carbide-Steel Tool e nang le Induction

Sepheo: Fana ka tharollo ho sesebelisoa sena sa tšepe-carbide brazing Material • 'Mele 10mm; motsoako oa carbide 57 x 35 x 3 mm • Braze shim

Mocheso: 750 ° C (1382ºF)

Kakaretso: 150 kHz

Sesebelisoa sa DW-UHF-20KW se futhumatsang se futhumatsang, se nang le seteishene sa mocheso o hole se nang le (2) 1.0 μF capacitors (bakeng sa kakaretso ea 0.5 μF) Koli ea ho futhumatsa ea 4.5-helical induction e etselitsoeng le e ntlafalitsoeng ka kotloloho bakeng sa ts'ebeliso ena.

Ts'ebetso: 'mele oa shim le carbide li hloekisoa ebile li phunyeletsa ho phalla ha li sebelisoa hohle holim'a kopano. Likarolo li behiloe hammoho ka koili ea induction. Ho na le li-tubes tse peli tsa ceramic tse behiloeng ka har'a lipiere tse hanyetsanang ho tšoara likarolo ha li futhumatsa. Motsoako oa likarolo o lumelloa ho omella pele ho futhumatsa. Mocheso oa ho futhumatsa o sebelisoa ho fihlela sebete se phalla ka kopane.

Liphello / Melemo

• Ho futhumatsa ho lekanngoeng ho kopane ha sebete ho sebetsa hantle

• Tshebetso e se nang molato e nepahetse, e laoleha

• liphetho li hlaha hape

Carbide ea Brazing ho Tšepa le ho Koetlisa

Carbide ea Brazing ho Tšepa le ho Koetlisa 

Sepheo: Likopano tsa lifofane tsa Braze carbide rotary tse nang le seaparo se ikhethang sebakeng sa ho sebetsa ha sefofane

lintho tse bonahalang:

• Carbide e se na letho

• Sesebelisoa se lebelo se phahameng

• Mocheso o bontšang pente

• Braze shim le motsoako o motšo

Mocheso 1400 ° F (760 ° C)

Frequency 252 kHz

Sesebelisoa sa DW-UHF-10kw secheso sa ho futhumatsa, se nang le setsi sa mocheso o mocheso o nang le li-capacitor tse peli tsa 0.33 μF (kakaretso ea 0.66 μF).

Ts'ebetso A coil ea helical ea li-multi-turn e sebelisoa. Karolo e futhumetse ho fumana nako e hlokahalang ho fihlela mocheso o batlang le mocheso o hlokahalang oa mocheso. Ho nka metsotsoana e ka bang 30 - 45 ho fihla 1400 ° F (760 ° C) ho latela boholo ba likarolo tse fapaneng. Flux e sebelisoa karolong eohle. Brim shim e behiloe pakeng tsa tšepe shank le carbide. Matla a futhumatsang a futhumatsa a sebelisoa ho fihlela braze e phalla. Ka fixturing e nepahetseng, ho tsepamisa mohopolo ha karolo eo ho ka fihlelleha.

Liphello / Melemo • Mocheso o tsitsitseng, o tsitsitseng.