mini gold melting furnace with induction

Description

Mini Gold Melting Furnace with Induction

Goldsmith Mini medium frequency melting furnace for melting gold,silver,jewelry,copper,iron steel and stainless steel technical parameters

  1. Working voltage: 200v – 235v
  2. Working frequency: 50hz – 60hz
  3. Working power: 1kg 3500w /  2kg 5000w,The controller adjust the power
  4. Smelting capacity: 1kg gold or 2kg gold
  5. System protection: IGBT overheat and overcurrent protection, water shortage protection, over voltage / low voltage, surge, coil open / short circuit, with no pot circuit detection function, a variety of internal fault automatic detection procedures, such as automatic alarm protection when the drive frequency is wrong, More than 30 protection programs.

  6. Water-cooled system: comes with an external water pump, the flow rate is 1L water per minute.

  7. Melting temperature: The actual temperature can be heated up to 1600 degrees
  8. Dimensions: Approx. (280 length * 220 width * 320 height) Innovative design, small size and light weight.
  9. Machine gross weight: about 7.5KG
  10. Melting speed: 500g of copper, silver, gold. About 6 minutes (this is the actual test value). Materials such as stainless steel and iron can also be melted

Content: 1 furnacer, 1 tong, 1 set crucible

mini-medium-frequency-Gold-induction-melting-furnacer-silver-smelting-Ovan-jewelry-tools-casting-equipment