Heat treatment of gear and shaft,Floating melt for institute or college research and so on,Surface quenching,Brazing of copper bars,Heating of bullet shell, Annealing of wire continuously
Induction Brazing Billets Equipment
1.With high frequency up to 200KHz , and very thin and tiny parts can be easily heated.
2.IGBT and current inverting technologies have been used; higher reliability and lower maintenance cost.
3.100% duty cycle, continuous working is allowed at maximum power output.
4.Constant current or constant power status can be selected accordingly to achieve higher heating efficiency;
5. Display of heating power and heating current and oscillating frequency.
6. Simple to install , installation can be done by unprofessional person very easily;
7. Light weight, small size;
8. different shape and size of induction coil can be changed easily to heat different parts.
9. Advantages of the model with timer: the power and the operating time of the heating period and the retain period can be preset respectively, to realize a simple heating curve, this model is suggested to use for batch production to improve the repeatability.
Particularly designed for small precision pieces soldering,quenching,heating.
* Harden treatment for belt of saw,knife.
* Harden treatment for both sides belt of knife.
* Quenching valves.
* Heating electrode.
* Brazing of the saw tip.
* Quenching of the gear.
* Heating of the small screw.
* Drills forging or hardening.
* Brazing of the small PCB drills.
* Brazing for parts of jewellery.
* Brazing for parts of hardware.
* Brazing for the parts of optical spectacle frame.
* Soldering for DLC data link connector.
* Tin-Lead bonding Antennas.
* Tin soldering Coaxial Cable.
* Annealing the small parts.
* Brazing of the tools.
* Quenching of the small shaft.
* Shaping of the small shaft.
Max Input Current
>0.2 MPa, 5 L/Min,