Wayar Hanyar shigowa zuwa Aluminum Lug

Manufa Makasudin wannan waya ta saka shigar da wuta zuwa lamin aluminum a karkashin dakika 30. Kayan aiki DW-UHF-6KW-III na hannu mai shigar da wutar lantarki HLQ al'ada kewaya Maɓallan Maɓallan Powerarfi: 1.75 kW Zazzabi: Kimanin 250 ° C (482 ° F) Lokaci: 25 seconds Kayayyakin Aluminum Lug Litz Haɓakar Indarfafa derarfafa Injin: Don fara Tsarin sayarda shigar da wuta, kayan lemun karfe… Karin bayani

Ƙunƙwasawa Ƙarfafa Gidajen Aluminum

Ƙunƙwasawa Ƙarƙashin Gidajen Aluminum tare da Ƙungiyoyin Ƙunƙwasa na Ƙungiyar IGBT

Manufa Gumi gidan haske na almini don siyar da taron LED zuwa asalin ciki
Gida mai haske tare da toshe jan ƙarfe, gidan haskoki na aluminum 5 "(127mm) dia a saman, 1.25" (31.75mm) dia a gindi, fenti yana jin zafin fenti
Zazzabi 500 ºF (260 ºC)
Yanayin 45 kHz
Kayan aiki • DW-UHF-45kW tsarin dumama wuta, sanye take da matattarar matattarar aiki mai ɗauke da ƙarfin 1.0μF ɗaya.
• coarfin zafin mai sanyawa wanda aka tsara kuma aka haɓaka musamman don wannan aikin.
Tsari Ana amfani da murfin pancake mai yawa don dumama ƙasan gidan haskoki na aluminum. Babu gidan LED don haka ana yin wannan aikace-aikacen da fenti mai zafin jiki don tantance yuwuwar. Ana amfani da fenti mai auna zafin jiki inda gidan LED ke zaune a tsakiyar
gidajen haskakawa. Tushen gidan ya kai 500 ºF (260 ºC) a cikin sakan 30.
Sakamako / Amfanin Induction dumama yana samarwa:
• heatingarfin hannu mara hannu wanda ba ya haɗa da ƙwarewar mai sarrafa kere kere
• Saurin lokaci samar, karin makamashi
• Sakamakon, sakamakon maimaitawa
• Ko da rarraba dumama

induction ƙaddamar da aluminum gidaje