Induction Brazing Brass Studs zuwa Bututun ƙarfe

Uarfafa Brass Brass Studs zuwa Bututun Bututun Manufa: uunƙwasa brass bras bras a cikin bututun jan ƙarfe Abokin ciniki: Mai ƙera bututu don aikace-aikacen dumama masana'antu. Kayan aiki: DW-UHF-40KW Induction Brazing Systems - kayayyaki biyu. Kayan aiki: Brass bra (girman: 25mm diamita, 20 mm tsawo) :arfi: 30 kW Tsarin aiki: Babban ƙalubale a yayin aiwatar da aikin brazing… Karin bayani

Ƙungiyar Brazing Brass Faurewa

Ƙungiyar Brazing Brass Faurewa

Manufar Brazing dakuna guda biyu a kan wani katako na dakunan wanka
Abubuwan kayan aiki na kwalliyar tagulla 1 "OD, ƙirar ƙarfin ƙarfe, hawan
Zazzabi 1148 ºF (620 ºC)
Yanayin 90 kHz
Kayan aiki • DW-UHF-30 kW tsarin dumama wuta, sanye take da matattarar matattarar aiki mai ɗauke da na'urori masu ƙarfin 1.0 μF takwas don jimlar 8.0 μF
• coarfin zafin mai sanyawa wanda aka tsara kuma aka haɓaka musamman don wannan aikin.
Tsari Zaka yi amfani da murfin C mai sau biyu don yin amfani da murya.
Ana sanya zoben tagulla a haɗin, sassan sun haɗu kuma suna jujjuyawa. Haɗin haɗin gwiwa na farko yana da zafi mai tsawon sakan 30 kuma zoben takalmin yana gudana. An juya majalissar & haɗin haɗin na biyu yana da zafi na dakika 30 don gudana zoben ƙarfafa. An kammala brazes guda biyu a cikin dakika 60.
Sakamako / Amfanin Induction dumama yana samarwa:
• Sakamakon gaggawa, maimaitawa da daidaituwa
• Wutan da aka gano yana samar da tsabta da tsabta
• heatingarfin hannu mara hannu wanda ba ya haɗa da ƙwarewar mai sarrafa kere kere
• Ko da rarraba dumama

Brazing Brass A Cikin Kwaiwa Tare da Hanya

Brazing Brass A Cikin Kwaiwa Tare da Hanya

Makasudin: Don ƙarfafan masu amfani da ƙafafun ƙarfe na ƙarfe a cikin jigilar tubes da aka yi amfani da su a cikin hadikun iska na iska.

Zazzabi 1400 ºF 750 ° C

Yanayin 350 kHz

Kayan kayan aikin DW-UHF-4.5KW tsarin hawan ƙarfe, ciki har da maɓallin shigarwa na uku da ke cikin rubutun kalmomi guda uku ta amfani da masu amfani da 0.33μF biyu (duka 0.66μF)

Tsarin Tsarin ƙananan rabon ƙananan juzu'i, ana amfani da ruwa zuwa dukkan sashi kuma gawar jan ƙarfe na jan ƙarfe da aka haɗa ta yin amfani da ƙaddarawa (ƙyale adadin yawan ƙarfe a kowace haɗin gwiwa). Ana sanya taron a cikin kwalba kuma yana mai tsanani don 20-30 seconds zuwa zafin jiki na 1400 ° F. Don manyan majalisai na tube na ƙarfe, an yi amfani da wannan tsari, amma an yi amfani da allurar ƙwallon ƙafa zuwa haɗin haɗin don hana haɗin da ke gudana daga cikin haɗin gwiwa. Ana bada shawarar yin amfani da ƙwayar ƙafa don taimakawa mafi kyau ga tsarin.

Sakamako / Amfanin

Tattalin Arziki: Ana amfani da wutar lantarki a lokacin zafi kawai

Daidaitawa: Sakamakon gyaran fuska suna da maimaitawa da kuma ɗayansu

Brazing Brass Fittings Tare da Induction

Fitunƙarar Brass Brass Tare da Indarƙirar Maɗaukaki: Don zuga majalisai na ƙarfe na tagulla zuwa 750 ° C don aikin brazing. Girman tubing ya banbanta daga inci 3 zuwa 8 (76.2 zuwa 203.2 mm) Kayan abu: Brass tubing Brass flange Braze zoben Braze flux Zafin zafin jiki: 1382 ° F (750 ° C) Frequency 200 kHz Boats DW-UHF-20KW, 150-500 kHz shigarwa samar da wutar lantarki, sanye take da… Karin bayani

Brazing Copper Tube zuwa Brass Fitting Tare da Induction

Brazing Copper Tube zuwa Brass Fitting Tare da Induction 

Manufar: Don yin amfani da wutar lantarki don yin amfani da murfin jan ƙarfe ta hanyar amfani da na'urar da aka yi amfani da shi ta hanyar amfani da waya. Tsarin aiki zai faru ne a ƙarƙashin yanayi na Nitrogen da 4% Ginan gas. Daftarin gyare-gyare na gyaran fuska sun narke a 1190 ° F, amma sassan suna bukatar a kiyaye a karkashin 1300 ° F. Dole ne a sarrafa sassan a cikin nau'i na 175 zuwa 200 a kowace awa wadda ke fassara cikin 18 seconds na lokacin hutawa ta bangare.

Abun Tubing Tuban Copper Mai aunawa 0.5 ″ OD da 2 ″ Tsawon, ssarfafa tagulla, Braze Preform, Babu Fari.

Temperatuwan Sama da 1190 ° F amma ba za ta wuce 1300 ° F ba

Yawancin lokaci: 300 kHz

Kayan aiki: DW-UHF-10KW fitarwa mai karfi na ƙarfafa wutar lantarki tare da ƙananan nau'ikan (3) guda uku, ƙarfin (8) guda takwas (0.66) masu ƙaddamar da 10 μF, da kuma maɓallin alamar sauƙi huɗu. Tsarin Daftarin DW-UHF-XNUMXKW ya samar da wutar lantarki mai karfi tare da takamaiman alamar maɗaukaki guda huɗu da aka yi amfani da shi don cimma sakamakon da ya biyo baya.

Sakamako • An samo yanayi da aka buƙata a ƙarƙashin kwalba ta kwalba ta hanyar samar da 95% Nitrogen / 5% Hannun lantarki a cikin nauyin 25-30 cfh. • Hanya na zafin jiki na kawai 10 seconds ya zama dole don samun isasshen tsabtace ƙarancin wanda ya wuce iyakar da ake bukata na 18 seconds.