High frequency induction hardening flange groove process

Description

High frequency induction hardening flange groove process

Objective
High Frequency Induction Hardening a flange groove to 1508˚F (820˚C) in 3 minutes using induction heating.

Recommended Equipment
The recommended equipment for this application is the
DW-UHF-20KW induction hardening machine

Materials

42CrMoS4 – 1.14” thick x 2.69” ID x 4.61” OD (29 mm
thick x 68.4 mm ID x 117 mm OD)

Key Parameters

Hardness: 52.9 HRC
Power: Up to 15 kW
Temperature: 1508˚F (820˚C).
Time: 3 minutes